Shot Support

To add a new device to your Shot Scope account, follow these steps:Open the Shot Scope app and log into your account.Navigate to the 'More' section (usually found in the bottom menu).Tap 'Add New D...

We’re planning what’s next and want to hear from you. Please take this short survey to share what features you’d love to see in Shot Scope:Click here to open survey

Turn on the rangefinder by pressing the POWER button once. If the laser doesn't power on make sure you have removed the plastic from the battery.

You need to remove the plastic coating around the battery inside the device. Once the plastic has been removed and the battery has been re-inserted the device will power on and function.

Before turning the rangefinder on, hold the POWER button for 5 seconds to change units between Yards and Meters. The rangefinder will vibrate and cycle between Yards and Meters. Release the button ...

If used in misty or foggy conditions the laser may struggle to lock on to a pin or feature and display a yardage. The mist or fog makes it difficult for the optics to focus on a point due to interf...

Focus is adjustable as shown in the diagram. Rotate the ring clockwise or counter clockwise to adjust to the correct focus for your eyes.  

Adaptive Slope Technology provides you with compensated distance based on whether a target is uphill or downhill from your location. For example, a 156.8 yard uphill shot of 7 degrees really plays ...

Turning on and distance to the flag: Turn on the rangefinder by pressing the POWER button once. Then press and release the POWER button while aiming at the target. The laser will vibrate when it ha...

The rangefinder requires a CR2-3v battery and supports approximately 5,800 measuring times. When the battery icon appears on the screen it means the battery is low and should be replaced. Turn on t...